roadwise.Open study app

Nebraska driving lesson · Signals & Signs

Turning on red, lane-use signals and hybrid beacons

A 3-minute lesson from the Nebraska course. Read the rules and examples, follow the handbook page references, and check your understanding before you move on.

Read time
3 minutes
Course unit
Signals & Signs
Checkpoint questions
6
Source pages
40, 41

Nebraska allows some turns on red after a full stop. Special signals also control reversible lanes and midblock pedestrian crossings.

Know the rule

Before any turn on red, come to a complete stop, look both ways, and yield to pedestrians and other traffic. Failing to stop completely before turning is a violation.

Handbook p. 40 ↗

Know the rule

Right on a circular red light is allowed after stopping, unless signs at the intersection prohibit it.

Handbook p. 40 ↗

Know the rule

Left on a circular red light is allowed after stopping only when turning from a one-way street onto another one-way street, and it may be prohibited at some locations. Turning on a red arrow is prohibited.

Handbook p. 40 ↗

Lane use signals

Overhead signals that reverse a lane's direction at different times of day, usually for rush hour traffic. Lanes may also be marked with signs.

Handbook p. 40 ↗
Lane use control signals
Red X
Lane use control signals
Yellow X
Lane use control signals
Downward green arrow

Lane-use signals mean:

  • Red X: never drive in that lane
  • Steady yellow X: move out of the lane as soon as safely possible; a red X will soon appear
  • Downward green arrow: you may drive in that lane
Handbook p. 40 ↗

Pedestrian hybrid beacon

A signal that helps pedestrians cross at a marked crosswalk at an unsignalized location. It has two side-by-side red lights centered over a yellow light.

Handbook p. 41 ↗
Pedestrian hybrid beacon (flashing red)
Hybrid beacon: alternating flashing reds

Pedestrian hybrid beacon sequence

Pedestrian hybrid beacon sequence
Beacon showsWhat you do
DarkProceed; the dark-signal stop law doesn't apply
Flashing yellowBe ready: solid yellow and a stop are coming
Solid yellowSame as a normal yellow light
Both reds steadyStop and stay stopped (pedestrians have WALK)
Reds flashing back and forthStop; go only if no pedestrian in your or next lane
Handbook p. 41 ↗

Put it into practice

You're on a one-way street, stopped at a red light, and want to turn left onto another one-way street. With no sign prohibiting it, you may turn after stopping completely and yielding to pedestrians and traffic.

Check your understanding

Read the question, decide on an answer, then open it to check the explanation. These are Roadwise study questions based on the source handbook.

Turning right at a circular red light after stopping is:
  1. Never allowed in Nebraska
  2. Allowed only outside city limits
  3. Allowed only between 6 a.m. and 6 p.m.
  4. Allowed, unless a sign prohibits it

Answer: Allowed, unless a sign prohibits it

Right on red is allowed after a stop unless a sign says otherwise.

Handbook p. 40 ↗
Turning left at a circular red light after stopping is allowed only when:
  1. Traveling from a one-way street onto another one-way street
  2. Traveling on any two-lane road
  3. At any intersection with no other traffic
  4. Only during daylight hours

Answer: Traveling from a one-way street onto another one-way street

Left on red is limited to one-way-to-one-way turns.

Handbook p. 40 ↗
A steady yellow 'X' lane signal means a driver should:
  1. Speed up to clear the lane immediately
  2. Move out of that lane as soon as safely possible
  3. Stop immediately in that lane
  4. Continue driving normally in that lane

Answer: Move out of that lane as soon as safely possible

A yellow X means move out of the lane soon, since a red X is coming.

Handbook p. 40 ↗
Driving under a red 'X' lane signal is:
  1. Allowed if traffic is light
  2. Allowed only to pass a slower vehicle
  3. Never allowed
  4. Allowed during off-peak hours

Answer: Never allowed

A red X always closes that lane to travel.

Handbook p. 40 ↗
A pedestrian hybrid beacon begins its active cycle with:
  1. A solid red light immediately
  2. A flashing red light immediately
  3. A solid green light
  4. A flashing yellow light

Answer: A flashing yellow light

The beacon's cycle starts with a flashing yellow light.

Handbook p. 41 ↗
During the pedestrian hybrid beacon's alternating flashing red phase, a driver must:
  1. Stop and verify no pedestrian is in the lane before proceeding
  2. Proceed without stopping, since pedestrians have already crossed
  3. Treat it as a solid red and never proceed
  4. Wait for the beacon to turn green

Answer: Stop and verify no pedestrian is in the lane before proceeding

Drivers must stop and confirm no pedestrian is present before proceeding.

Handbook p. 41 ↗
Take the lesson checkpoint in the app

More in Signals & Signs